Drum In Ear Amp 2
- Description
- Specifications
The Drum In Ear Amp 2 is specially designed to supply in-ear systems of drummers.
When using in-ear monitoring, drummers in particular require additional support in the lower end which allows them to feel the beat of the bass drum. Using a low frequency transducer which is mounted at the drummer throne enables this feeling without noise.
The Drum In Ear Amp is a mix between headphone amp and shaker amp and can be combined with various transducers (Bass Shaker or ButtKicker). The mount at the amplifier casing enables fixing the unit at the drum set for comfortable operation.
The amplifier of the Drum In Ear Amp 2 is switchable with maximum 250 watts.
The Drum In Ear Amp 2 can also power the high-output ButtKicker LFE. When switching over the amplifier power to 65 watts, it can also operate the bass shaker Bass Pump III.
Drum In Ear Amp 2 & ButtKicker LFE "Set"
Includes: Drum In Ear Amp 2 &
ButtKicker LFE &
Universal mount
HAS0006023
Description
Full Drummer Package:
Drum In Ear Amp 2 and ButtKicker LFE incl. universal mount to be fixed to the drummer’s seat
Drum In Ear Amp 2 & Bass Pump III "Set"
Includes: Drum In Ear Amp 2 &
Bass Pump III &
Universal mount
HAS0006023
Description
Full Drummer Package:
Drum In Ear Amp 2 and Bass Pump III incl. universal mount to be fixed to the drummer’s seat
In Ear Body Pack XL
- Description
- Specifications
- Optional Accessories
The Body Pack XL has the same functional principle as the Fischer Amps Hardwired In Ear Body Pack, but it includes an additional Mic-In which allows to add-on a microphone signal to the stereo or mono mix received.
An additional feature for the microphone input is the parallel out which allows to loop the microphone signal.
The Body Pack XL is powered with a 9V battery or an additional mains adaptor (not included).
This Body Pack is a compact in ear solution not only for orchestra musicians who want to mix their own microphone signal to the incoming in ear signal, but it is also an excellent tool for sound engineers to monitor microphone signals.
The integrated low-noise microphone preamp has standard features such as:
- 48V phantom power
- PAD switch to reduce the input signal by 20 dB
- gain control from + 12 dB to + 60 dB
- add-on low-cut at 70 Hz.
Dimensions L x W x H (in mm): 125 x 136 x 32
Weight: approx. 430 g without battery
Input jacks: 3 Neutrik XLR 3-pole, with interlock
Output jack: 3.5mm / 1/8" mini jack stereo, 1 XLR Mic Link-Out
Frequency response: 30 Hz - 20 KHz +/- 2dB
Min. impedance of earphones: 12 ohms per side
Input impedance: 15kohms channel 1 and 2; 2 kOhms microphone input (with PAD switch = 15 kOhms)
Nom. input level balanced: 0 dBV (channel 1 and 2)
Max. input level balanced: +4dBV (channel 1 and 2)
Limiting of the input signal: from +5 dBV (channel 1 and 2)
Input level mic input: -60 dB to +6 dB
Max output power into 20 ohms: 40 mW per channel
Max. operating current: 65 mA (with add-on phantom power 120-140 mA)
Power supply: 9V block alkaline battery or 8.4V rechargeable battery NiMH with min. 270 mAh
DC input: Ext. input power DC 9V (pin +, ring -)
Operating time of battery: Alkaline battery (500 mAh) approx. 7.5 hours, NiMH rechargeable battery (270 mAh) approx. 4 hours (depending on headphones volume)
Developed and manufactured in Germany
DC mains adaptor for Hardwired In Ear Belt Pack
HA00006010
100-240VAC- 9VDC 1A, with locking Switchcraft DC connector, cable 1.8 m (71") with Euro plug
Hardwired In Ear Belt Pack
- Description
- Specifications
- Optional Accessories
Wired, portable in-ear monitor system – our “classic” product!
Hard-wired headphone amp for those musicians whose instrument restrict their freedom of movement (keyboards, drums, percussions, background vocals).
- Two direct balanced XLR inputs (no special cable required, can also be connected asymmetrically)
- Much better sound than with wireless in ear systems
- Switch-over from stereo to mono-mix mode
- 2 x 40mW output power with limiter
- Control for volume and pan/mix
- Sturdy and road-worthy design: aluminum casing, belt clip of stainless steel, Neutrik sockets
- Mains connector (lockable) to connect an external DC mains adaptor (optional extra)
- Power supply with 9V block battery (not included)
- Hours of operation with alkaline battery approx. 12h, with rechargeable battery approx. 8h
Dimensions L x W x H (in mm): 127 x 82 x 30
Weight: 290 g
Input connectors: 2 Neutrik XLR jacks 3-pole, with interlock
Earphone connector: 1/8" (3.5mm) mini connector
Frequency response: 30 Hz - 20 KHz +/- 2 dB
Minimum impedance of earphones: 12 ohms per side
Input impedance: 15kohms
Nom. input level: 0dB - +4dB (limiter at +6dB)
Nom. input level balanced: 0 dBV
Max. input level balanced: +4 dBV
Limit input level balanced: from +5 dBV
Max output power at 20 ohms: 40 mW per channel
Max. operating current: 40 mA
Power supply: 9V block alkaline battery or 8.4V rechargeable battery NiMH
DC-input plug: ext. input power DC 9V (pin +, ring -)
Operating time of battery: approx. 8h with 270mAh rechargeable battery, approx. 12h with alkaline battery (depends on headphones volume)
Developed and manufactured in Germany
DC mains adaptor for Hardwired In Ear Belt Pack
HA00006010
100-240VAC- 9VDC 1A, with locking Switchcraft DC connector, cable 1.8 m (71") with Euro plug
DC Mains Adaptor for Hardwired In Ear Belt Pack 100-240V 1A / 9V
HA000060102
Suitable for HA00001100 and HA00001130
Shaker Amp 400
- Description
- Specifications
- Rack-mount amplifier (19-inch) to operate a low frequency transducer ButtKicker LFE with a power of 500W max. into 4 ohms.
- A microphone preamp with add-on 48V phantom power and -16dB Pad switch is integrated in the Shaker Amp 400 which allows direct connection of bass drum microphones.
- The combined XLR/jack connector is equipped with a parallel out to loop the input signal.
- The add-on active crossover (low pass 40 to 200Hz / 12dB/oct.) and an add-on high pass with 20 Hz adjust the signal if necessary to the optimum working frequency of the shaker.
- The Shaker Amp 400 is perfect for use with the Fischer Amps In Ear Amp 2 or with a mixing console!
Shaker Amp 400 & ButtKicker LFE "Set"
Includes: Shaker Amp 400 &
ButtKicker LFE &
Universal mount
HAS0006023
Description
Full Drummer Package:
Shaker Amp 400 and ButtKicker LFE incl. universal mount to be fixed to the drummer’s seat
ButtKicker LFE
- Description
- Specifications
- Optional Accessories
The high-end low frequency transducer with tremendous power and true infrasonic or low frequency response.
No other shaker is more musical (linear). The ButtKicker is used in musician monitoring systems, stage platforms, dancefloors, amusement rides/games, simulators, etc.
The ButtKicker is perfect for use with the Fischer Amps “Shaker Amp 400”
Frequency response: 5 - 200 Hz
Power handling: 400W min, 1500W max.
Weight: 5 kg
Mounting bracket: 125 x 105mm
Dimensions: 140 x 140mm
Connections: screw terminals
Impedance: 4ohms
Universal Mount
HAS0006023
Universal mount for bass shakers/transducers made of polished stainless steel (incl. 4 fixing screws to mount the shaker to the center beam of the seat
Bass-Pump III
- Description
- Specifications
- Optional Accessories
-
Frequency response: 5 - 200Hz
-
Maximum continuous input power 50W (RMS)
-
Dimensions: 160 x 40mm
-
Connections: screw terminals
-
Impedance: 4ohms
Universal Mount
Universal Mount
Description
- ButtKicker LFE
- ButtKicker Concert
- ButtKicker mini
- Bass Pump III